How To Untangle Chainsaw Chains The Right Way
If a chainsaw’s chain gets tangled up on a branch, tree or other object, it is important to know how you can get it back in order. You don’t want to pull on the saw too hard while it is still running. This could cause serious injury.
It is important to ensure that your chainsaw doesn’t get stuck on anything during cutting.
If you’ve used one for a while, you likely already know some tips and techniques. These include turning off the unit before you start to cut. This will prevent problems from ever happening.
What happens if your cutting path becomes blocked by an object such as a tree branch or other debris? You can fix these problems easily and you don’t have to turn off your chainsaw. We provide instructions on how untangle chainsaw chains.
Some chainsaws can be used with an inertia brake. This device will stop the saw from moving too fast or for any other reason.
If your chainsaw is equipped with one of these, you will need to turn it off before trying to untangle the chains. To ensure that nobody gets hurt, always unplug the machine when it is finished using.
Tool(s) Needed: Round-link
Flathead screwdriver, 8mm wrench Square-link: s/side cut or angle grinder/metal filing
Start by taking the bent bar out of the guide. Next, place it in a vice so that it doesn’t bend while you work.
Use a wire brush with pliers to remove any dirt or corrosion that may be preventing the bar from being removed. After this, you can start to realign your saw with an 8mm wrench and a flathead screwdriver or metal file.
Round-link Chains
Tap the screwdriver’s tip between the two links until it moves. Alternate which link you move to ensure it doesn’t twist out of place.
Square link chains can be made by cutting one end of each loop with scissors and then pulling them apart using pliers. Keep doing this until you have all four loops separated from one another.
After aligning the loops, you can use an 8mm wrench on the bar to turn it until the bars touch. Don’t tighten too much or you could damage the screw.
Between each bar and the saw chain, there should be approximately 1/20 cm. Try spinning one of your chains to check that it is tight enough. If the chains spin freely and there is no tension, adjust your bar to match. Then tighten it again using an 8mm wrench.
Square-link Chains
Use a s or a metallic file to cut each link one at a time. Each loop should be cut to a length that is not too short for them to touch.
Once everything is in place, and there is no tension between the links anymore, attach your bar again and spin it for approximately 10 seconds (making sure it doesn’t hit anything).
Take the bar off to inspect the bars. Make sure you check the links on both ends. You can tighten the chain by 1/20 cm if they touch. This process can be repeated until all your loops are free to move without touching.
Removing The Bar
Before you begin, make sure to wear your safety gear, such as gloves, eye protection, and headphones. It is risky to try to remove the bar from the saw while it is still running. If the chain malfunctions, you could be hurt. There are two ways to take the bar out:
Find The Place Where The Chainsaw Joints Connect, Then Screw Or Twist Them
Before you attempt this step, make sure the saw’s power is off and that there are no witnesses. This requires users to use their power tools without gloves.
First, open the blade guard. Next locate the screws that attach the chain to the bar by looking on the opposite side.
You can loosen them by turning the screwdriver counterclockwise until they are both free enough to be removed with pliers.
Another method involves you finding the joint of the saw and using a wrench or adjustable pair of pliers to open it. This will separate the chain from the metal and allow you to free the stuck piece.
Remove All Dirt And Grime From The Joint
To remove screws that are still holding the ends together, use a screwdriver. If necessary, you can take your time and remove any stubborn metal pieces with an adjustable wrench or pair pliers.
Do not rush. You could end up injuring your self or damaging your tools.
After removing all foreign objects from the joint, you can continue to unscrew until the sides are completely separate so that you can remove the stuck piece of metal.
Get A Hammer, A Chisel And Some Wood To Disassemble The Joint
If you are unable to seperate two pieces of metal with any other tools, this is your last resort. This involves placing one end on the saw’s surface. If you strike the other side with your hammer, it will force it through the joint.
It is crucial to not strike the metal directly. Otherwise, it could cause severe damage that will make it ineligible for future chainsaw chains.
To help the metal break down more easily, strike it from different angles.
As you removed your piece of metal, the metal chain should have come off, leaving a gap between two pieces of metal. This is not always true. If there is still a piece of metal between yours or the rest of the cutters you will need to remove it first before trying to put it back together.
The bump fire method is a better way to untangle chain. This involves pushing the base of the saw downwards with your knee and twisting the chain around with your hands.
You could injure yourself more if you don’t follow the instructions.
If none of these methods work, then you might give our customer service number another call to resolve the issue quickly and painlessly.
Please remember to include your serial number and model information. Also, please give us an approximate date of purchase.
If you are unsure about the date your chainsaw was purchased, use an Internet search to find out.
Tips To Remember When Using A Chainsaw
After every use, keep your chains well-oiled. This will prevent rusting and pitting as well as freezing. If you leave them out, it is best to keep them inside. Rainwater can cause severe damage.
Chains should never be allowed to play with by children. They are too small and fragile to grasp a chain securely.
While working, always wear gloves. Leather gloves are highly recommended for chainsaw operators. If your job doesn’t require it, I recommend you wear them regardless of whether or not you are working.
Never use a chainsaw to cut anything but wood. Concrete walls, cement blocks, and metal bars can cause severe damage to the blade, resulting in the loss of control and injury to the operator.
Never use a bar that is larger than the one your saw was made for. It will make it difficult to control and could cause your saw to kickback in a manner similar to when a horse kicks your leg.
Chainsaws can be dangerous and could cause injury if they are not used correctly. These precautions will ensure that your work is safe and efficient.
Final Verdict
How to Untangle Chainsaw Chain The method will vary depending on where your last piece of stuck chainsaw chain is located. If it’s closer to the teeth than where you started cutting, then you need to grab it with your wrench to unscrew it where it is.
If it is closer to your teeth than your starting point, grab it with pliers instead and turn counterclockwise until the pieces are separated again.
